|本期目录/Table of Contents|

[1]韩 笑,董晓坤,邓 涛.混炼型聚氨酯橡胶/聚十二内酰胺热塑性硫化胶动态硫化历程与性能[J].合成橡胶工业,2022,6:505-510.
 HAN Xiao,DONG Xiao-kun,DENG Tao.Dynamic vulcanization process and properties of millable polyurethane rubber/polylaurolactam thermoplastic vulcanizate[J].China synthetic rubber industy,2022,6:505-510.
点击复制

混炼型聚氨酯橡胶/聚十二内酰胺热塑性硫化胶动态硫化历程与性能(PDF)

《合成橡胶工业》[ISSN:1000-1255/CN:62-1036/TQ]

期数:
2022年6期
页码:
505-510
栏目:
出版日期:
2022-11-15

文章信息/Info

Title:
Dynamic vulcanization process and properties of millable polyurethane rubber/polylaurolactam thermoplastic vulcanizate
文章编号:
1000-1255(2022)06-0505-06
作者:
韩 笑董晓坤邓 涛
1. 中国船舶集团有限公司第七二五研究所, 河南 洛阳 471023; 2. 青岛科技大学 高分子科学与工程学院, 山东 青岛 266042
Author(s):
HAN Xiao12DONG Xiao-kun2DENG Tao2
1. Luoyang Ship Material Research Institute, Luoyang 471023, China; 2. School of Polymer Science and Engineering, Qingdao University of Science and Technology, Qingdao 266042, China
关键词:
混炼型聚氨酯橡胶聚十二内酰胺动态硫化热塑性硫化胶共混物硫化特性力学性能
Keywords:
millable polyurethane rubber polydodecalactam dynamic vulcanization thermoplastic vulcanizate blend curing characteristic mechanical property
分类号:
TQ 334.1
DOI:
DOI:10.19908/j.cnki.ISSN1000-1255.2022.06.0505
文献标识码:
B
摘要:
采用动态硫化方法制备了混炼型聚氨酯橡胶(MPU)/聚十二内酰胺(PA 12)热塑性硫化胶(TPV),通过控制动态硫化时间探究了该TPV的动态硫化历程,同时研究了不同动态硫化阶段共混物的物理机械性能和动态力学性能。结果表明,随着动态硫化时间的延长,MPU/PA 12 TPV逐步完成相转变,在温度和剪切作用下,MPU相由连续相转变为分散相,而PA 12则由分散相转变为连续相;随着动态硫化时间的延长,MPU/PA 12共混物的储能模量升高,损耗模量降低,损耗因子减小。此外,随着动态硫化时间的延长,MPU/PA 12共混物的综合力学性能提高。
Abstract:
Millable polyurethane rubber (MPU)/poly(dodecalactam) (PA 12) thermoplastic vulcanizate (TPV) was prepared via dynamic vulcanization method, and the dynamic vulcanization process of MPU/PA 12 TPV was explored by controlling the dynamic vulcanization time, At the same time, physical and mechanical properties, and dynamical mechanical properties of the blends in different dynamic vulcanization stage were studied. The results showed that with the extension of dynamic vulca-nization time, MPU/PA 12 TPV gradually completed the phase transformation process. Under the action of temperature and shear force, MPU phase changed from continuous phase to dispersed phase, while PA 12 phase changed from dispersed phase to conti-nuous phase. Storage modulus of MPU/PA 12 blends increased, loss modulus decreased, and loss factor reduced with the extension of dynamic vulcanization time. In addition, the comprehensive mechanical properties of MPU/PA 12 blends were improved with the extension of dynamic vulcanization time.

参考文献/References

[1] 杨清芝. 现代橡胶工艺学[M]. 北京: 中国石化出版社, 1997: 73-76.[2] 刘凉冰. 化学结构对混炼型聚氨酯橡胶性能的影响[J]. 橡胶工业, 2017, 64(11): 696-700.[3] Turri S, Valsecchi R, Levi M, et al. Microstructure to property relations in a family of millable polyurethane fluoroelastomers[J]. European Polymer Journal, 2008, 44(9): 2951-2961.[4] 邢立华, 伍社毛, 张立群, 等. NBR/PA 12 TPV的制备与性能研究[J]. 橡胶工业, 2010, 57(3): 139-144.[5] 田立斌, 张金悦. 动态全硫化共混型热塑性弹性体的研究进展[J]. 塑料科技, 2002(1): 50-54.[6] Wu Hanguang, Ning Nanying, Zhang Liqun, et al. Effect of additives on the morphology evolution of EPDM/PP TPVs during dynamic vulcanization in a twin-screw extruder[J]. Journal of Polymer Research, 2013, 20(10): 266-268. [7] 徐忠亮. 动态硫化热塑性弹性体结构与性能研究进展[J]. 石化技术, 2019, 26(6):377-380.[8] Magioli M, Sirqueira A S, Soares B G. The effect of dynamic vulcanization on the mechanical, dynamic mechanical and fatigue properties of TPV based on polypropylene and ground tire rubber[J]. Polymer Testing, 2010, 29(7): 840-848.[9] 梁爱民, 吕鹏飞, 徐林, 等.硫化体系对动态硫化EPDM/PP热塑性弹性体性能的影响[J]. 弹性体, 2020, 30(4): 47-50.[10] 刘凉冰. 聚氨酯弹性体的回弹性能[C]∥中国聚氨酯工业协会. 中国聚氨酯工业协会第十七次年会论文集. 洛阳: 中国聚氨酯工业协会, 2014: 7.

备注/Memo

备注/Memo:
更新日期/Last Update: 2022-11-15