|本期目录/Table of Contents|

[1]于兆鹏,赵朕,魏绪玲,等.端羟基遥爪聚异丁烯的制备与表征[J].合成橡胶工业,2022,3:182-187.
 YU Zhao-peng,ZHAO Zhen,WEI Xu-ling,et al.Preparation and characterization of hydroxyl-terminated telechelic polyisobutene[J].China synthetic rubber industy,2022,3:182-187.
点击复制

端羟基遥爪聚异丁烯的制备与表征(PDF)

《合成橡胶工业》[ISSN:1000-1255/CN:62-1036/TQ]

期数:
2022年3期
页码:
182-187
栏目:
出版日期:
2022-05-15

文章信息/Info

Title:
Preparation and characterization of hydroxyl-terminated telechelic polyisobutene
文章编号:
1000-1255(2022)03-0182-06
作者:
于兆鹏赵朕魏绪玲张昊刘若凡龚光碧伍一波
1. 北京石油化工学院 新材料与化工学院/特种弹性体复合材料北京市重点实验室, 北京 102617;2. 中国石油石油化工研究院 兰州化工研究中心, 兰州 730060
Author(s):
YU Zhao-peng ZHAO Zhen WEI Xu-ling ZHANG Hao LIU Ruo-fan GONG Guang-bi WU Yi-bo
1. Department of New Materials and Chemical Engineering/Beijing Key Lab of Special Elastomeric Composite Materials, Beijing Institute of Petrochemical Technology, Beijing 102617, China; 2. Lanzhou Petrochemical Research Center, Petrochemical Research Institute, PetroChina, Lanzhou 730060, China
关键词:
异丁烯可控活性正离子聚合遥爪聚异丁烯水解反应封端反应端羟基
Keywords:
isobutylene controlled living cationic polymerization telechelic polyisobutene hydrolysis reaction capping reaction terminal hydroxyl group
分类号:
TQ 333.8
DOI:
DOI:10.19908/j.cnki.ISSN1000-1255.2022.03.0182
文献标识码:
A
摘要:
使用5-叔丁基-1,3-二(2-氯代异丙基)苯/四氯化钛引发体系,通过可控活性正离子聚合反应制备了含双活性链末端的聚异丁烯,再使用1,3-丁二烯封端制备具有烯丙基氯末端结构的聚异丁烯,并结合四丁基氢氧化铵存在条件下水解的方法制备了双端羟基遥爪聚异丁烯,研究了封端时间对封端反应的影响,探讨了所得聚合物的热稳定性和低温性能。结果表明,在四丁基氢氧化铵存在条件下,由含氯链末端亲核取代方式制备所得聚合物的端羟基转化率高,反应时间短,原料便宜易得且制备工艺简便,所得产物的热稳定性及低温性能优良。
Abstract:
Polyisobutene with double living chain terminal was prepared by controlled living cationic polymerization using 5-tert-butyl-1,3-bis(2-chloroisopropyl) benzene/titanium tetrachloride initiator system, polyisobutene with allyl chloride terminal structure was prepared with 1,3-butadiene as end-capping agent, and then double hydroxyl-terminated telechelic polyisobutene was prepared via the hydrolysis of polyisobutene with allyl chloride terminal structure in the presence of tetrabutylammonium hydroxide. The effect of end-capping time on endcapping reaction was studied, and the thermal stability and low temperature property of the resulting polymer were discussed. The results showed that in the presence of tetrabbutylammonium hydroxide, the polymer with hydroxyl- terminated group prepared via nucleophilic substitution method of chlorine-containing chain terminal had high conversion rate, reaction time was short, the raw materials were cheap and easily available, the preparation process was simple and convenient, and the resulting polymer had excellent thermal stability and low temperature performance.

参考文献/References

[1] Lee Patricia T C, Chiu Chih-Wei, Chang Ling-Yu, et al. Tailoring pigment dispersants with polyisobutylene twin-tail structures for electrowetting display application[J]. Acs Applied Materials & Interfaces, 2014, 6(16): 14345-14352.[2] Ren Kai, Zhang Mingzu, He Jinlin, et al. Preparation of polymeric prodrug paclitaxel-poly(lactic acid)-b-polyisobutylene and its application in coatings of a drug eluting stent[J]. ACS Applied Materials & Interfaces, 2015, 7(21): 11263-11271.[3] Chao Chih-Gang, Kumar M P, Riaz N, et al. Polyisobutylene oligomers as tools for iron oxide nanoparticle solubilization[J]. Macromolecules, 2017, 50(4): 1494-1502.[4] Giller C B, Roland C M. Strength enhancement in miscible blends of butyl rubber and polyisobutylene[J]. Macromolecules, 2013, 46(7): 2818-2822.[5] Hancsók J, Bartha L, Baladincz J, et al. Relationship between the properties of polyisobutenyl succinic anhydrides and their additive derivatives[J]. Lubrication Science, 1999, 11(3): 297-310.[6] Chang V S C, Kennedy J P. Gas permeability, water absorption, hydrolytic stability and air-oven aging of polyisobutylene-based polyurethane networks[J]. Polymer Bulletin, 1982, 8(2): 69-74.[7] 孙育成. 聚异丁烯预聚物[J]. 上海化工, 2002, 27(19): 34-36. [8] Kwon Y, Faust R. Synthesis of polyisobutylene-based block copolymers with precisely controlled architecture by living cationic polymerization[J]. Advances in Polymer Science, 2004(167): 107-135.[9] Pinchuk L, Wilson G J, Barry J J, et al. Medical applications of poly(styrene-block-isobutylene-block-styrene)(“SIBS”)[J]. Bio materials, 2008, 29(4): 448-460.[10] Zhu Y, Storey R F. Synthesis of polyisobutylene-based miktoarm star polymers from a dicationic monoradical dual initiator[J]. Macromolecules, 2012, 45(13): 5347-5357.[11] Shohi H, Sawamoto M, Higashimura T. End-functionalized polymers by living cationic polymerization with EtAlCl2(2):Synthesis of homo - and heterotelechelic poly(isobutylvinylether) [J]. Macromolecules, 1992, 25(1): 58-63.[12] Morgan D L, Martinez-Castro N, Storey R F. End-quenching of TiCl4-catalyzed quasiliving polyisobutylene with alkoxybenzenes for direct chain end functionalization[J]. Macromolecules, 2010, 43(21): 8724-8740.[13] 邢其毅, 裴伟伟, 徐瑞秋, 等. 基础有机化学[M]. 北京: 北京大学出版社, 2016: 815-816.[14] Kwon Younghwan, Faust R, Chen Cinti X, et al. Synthesis and characterization of poly(isobutylene-b-pivalolactone) diblock and poly(pivalolactone-b-isobutylene-b-pivalolactone) triblock copolymers[J]. Macromolecules, 2002, 35(9), 3348-3357[15] Ojha U, Rajkhowa R, Agnihotra S R, et al. A new general methodology for the syntheses of end-functional polyisobutyle nes by nucleophilic substitution reactions[J]. Macromolecules, 2008, 41(11): 3832-3841.[16] Zaschke B, Kennedy J P. Novel thermoplastic elastomers: Polyis obutylene-block-polyamide multiblocks[J]. Macromolecules, 1995, 28(13): 4426-4432.[17] 朗G, 拉斯H·P, 马赫H. 利用硼氢化进行的异丁烯聚合物官能化: 中国, 17451111 A[P]. 2006-03-08.[18] 约瑟夫·肯尼迪, 图尔古特·努加伊, 尼汉·努加伊. 羟基封端的聚异丁烯的光化学制备及相关方法和应用: 中国, 105121484 A[P]. 2015-12-02.

备注/Memo

备注/Memo:
国家自然科学基金面上项目52073033);北京市优秀人才培养资助项目(青年拔尖个人项目)(Z 019-042);中国石油天然气股份有限公司兰州化工研究中心资助项目(KYWX-21-014)。
更新日期/Last Update: 2022-05-15