«上一篇/Previous Article|本期目录/Table of Contents|下一篇/Next Article»

《合成橡胶工业》[ISSN:1000-1255/CN:62-1036/TQ]

期数:

2024年2期

页码:

141-146

栏目:

出版日期:

1900-01-01

文章信息/Info

Title:

Aging behavior of fluororubber with high fluorine content in aviation lubricating oil

文章编号:

1000-1255（2024）02-0141-06

作者:

宋荣昊; 杨 睿; 王 辰; 苏正涛

中国航发北京航空材料研究院/中国航发减振降噪材料及应用技术重点实验室，北京 100095

Author(s):

SONG Rong-hao;  YANG Rui;  WANG Chen;  SU Zheng-tao

AECC Beijing Institute of Aeronautical Materials/AECC Key Laboratory of Vibration Noise Reduction Materials and Application Technology, Beijing 100095, China

关键词:

氟橡胶; 航空发动机润滑油; 耐润滑油热老化; 耐热空气老化; 物理机械性能; 体积变化率

Keywords:

fluororubber;  aero-engine lubrica-ting oil;  thermal aging resistance of lubricating oil;  hot air aging resistance;  physical and mechanical property;  volume change rate

分类号:

TQ 333.93

DOI:

DOI:10.19908/j.cnki.ISSN1000-1255.2024.02.0141

文献标识码:

B

摘要:

以高氟含量氟橡胶（FKM）为研究对象，考察了其在多种航空发动机润滑油中的高温耐介质性能，研究了润滑油种类差异导致高氟含量FKM硫化胶在物理机械性能方面的变化。结果表明，在温度200 ℃、时间72 h的润滑油中老化后，高氟含量FKM硫化胶仍可保持良好的压缩回弹性能，体积变化率均低于12%，力学性能轻微衰减，邵尔A硬度下降明显；对于不同种类的油品，高氟含量FKM硫化胶的力学性能衰减和体积变化率均表现出差异；润滑油在高温下对高氟含量FKM硫化胶的侵蚀作用包括物理溶渗和化学腐蚀。

Abstract:

High fluorine content fluororubber (FKM) was used as the research object, the high temperature medium resistance of high fluorine content FKM vulcanizates in a variety of aero-engine lubricanting oils was investigated, and the changes in physical and mechanical properties of high fluorine content FKM vulcanizates caused by different types of lubricanting oils were studied. The results showed that the high fluorine content FKM vulcanizates could still maintain good compression resilience after aging in lubricating oil at 200 ℃ for 72 h, the volume change rate was lower than 12%, the mechanical properties declined slightly, and the Shore A hardness decreased significantly. The mechanical pro-perty attenuation and volume change rate of high fluorine content FKM vulcanizate were different for different kinds of oil. The corrosion of lubricating oil on high fluorine content FKM vulcanizate at high temperature included physical infiltration and che-mical corrosion.

参考文献/References

［1］ 刘嘉，苏正涛，栗付平. 航空橡胶与密封材料［M］.北京：国防工业出版社，2011：117-125.［2］ 王婧， 韩秀峰， 廉一龙， 等. 含氟橡胶的研究进展及在航空发动机中的应用［J］. 合成橡胶工业， 2021，44（2）：150-157.［3］ Dinzburg B N. Influence of lubricant additives on rubber pro-perties in conditions similar to the field［J］. Lubrication Engineering，1995，51（10）：796-804.［4］ Yu Zhenhong， Herndon S C， Ziemba L D， et al. Identification of lubrication oil in the particulate matter emissions from engine exhaust of inservice commercial aircraft［J］. Environmental Science & Technology，2012， 46（17）：9630-9637.［5］ Lin Chihwei， Chien Chihui， Tan Jinzhu， et al. Dynamic mechanical characteristics of five elastomeric gasket materials aged in a simulated and an accelerated PEM fuel cell environment［J］. International Journal of Hydrogen Energy， 2011，36（11）：6756-6767.［6］ Lou Weitao， Zhang Weifang， Jin Tingzhu， et al. Synergistic effects of multiple environmental factors on degradation of hydrogenated nitrile rubber seals［J］. Polymers， 2018，10（8）： 897-915.［7］ Neppel A， Kuzenko M V， Guttenberger J. Swelling of fluoroelastomers in synthetic lubricants［J］. Rubber Chemistry and Technology， 1983，56（1）：12-20.［8］ Akhlaghi S， Pourrahimi A M， Sj■stedt C， et al. Degradation of fluoroelastomers in rapeseed biodiesel at different oxygen concentrations［J］. Polymer Degradation and Stability，2017，136： 10-19.［9］ Li Donghan, Liao Mingyi. Dehydrofluorination mechanism， structure and thermal stability of pure fluoroelastomer （poly（VDF-ter-HFP-ter-TFE） terpolymer） in alkaline environment［J］. Journal of Fluorine Chemistry， 2017，201：55-67.［10］ Lee S H， Yoo S S， Kim D E， et al. Accelerated wear test of FKM elastomer for life prediction of seals［J］. Polymer Testing， 2012，31（8）：993-1000.

备注/Memo

备注/Memo:

国家自然科学基金资助项目（21991125）。

常用功能

更新日期/Last Update: 1900-01-01