|本期目录/Table of Contents|

[1]陈 晨,黄冬梅*,章向宇,等.不同天然胶乳含量乳胶海绵材料的热空气老化行为[J].合成橡胶工业,2021,6:495-500.
 CHEN Chen,HUANG Dong-mei,ZHANG Xiang-yu,et al.Hot air aging behavior of rubber latex foams materials with different natural rubber latex content[J].China synthetic rubber industy,2021,6:495-500.
点击复制

不同天然胶乳含量乳胶海绵材料的热空气老化行为(PDF)

《合成橡胶工业》[ISSN:1000-1255/CN:62-1036/TQ]

期数:
2021年6期
页码:
495-500
栏目:
出版日期:
2021-11-10

文章信息/Info

Title:
Hot air aging behavior of rubber latex foams materials with different natural rubber latex content
文章编号:
1000-1255(2021)06-0495-06
作者:
陈 晨1黄冬梅1*章向宇2王 英2王武康2
1.中国计量大学 质量与安全工程学院,杭州 310018; 2.浙江省轻工业品质量检验研究院,杭州 310018
Author(s):
CHEN Chen1 HUANG Dong-mei1 ZHANG Xiang-yu2 WANG ying2 WANG Wu-kang2
(1.College of Quality and Safety Engineering, China Jiliang University, Hangzhou 310018, China; 2.Zhejiang Light Industrial Products Inspection and Research Institute, Hangzhou 310018, China)
关键词:
乳胶海绵热空气老化性能黄度指数白度指数交联密度动力学模型
Keywords:
rubber latex foam hot air aging performance yellowness index whiteness index cross-linking density kinetic model
分类号:
TQ 336.4+6
DOI:
10.19908/j.cnki.ISSN1000-1255.2021.06.0495
文献标识码:
B
摘要:
采用加速热空气老化方法对5种不同天然胶乳含量的乳胶海绵进行研究,通过老化动力学模型及黄度指数、白度指数、交联密度等指标对老化程度和老化速率进行表征,并探究材料的热空气老化行为。结果表明,在老化过程中,黄度指数随老化时间的延长而增加,白度指数随老化时间的延长而降低,交联密度在老化进程的前、中期阶段增加速率较快,后期阶段增加速率则有所变缓。通过对乳胶海绵动力学模型分析可知,在老化过程中天然胶乳质量分数为80%的乳胶海绵的老化反应速率最大,天然胶乳质量分数分别为50%、40%和0的乳胶海绵老化速率较为接近,从而表明天然乳胶含量低的乳胶海绵的热空气老化性能较好。
Abstract:
Five kinds of rubber latex foams with different natural rubber latex content were studied by the accelerated hot air aging method, and the aging degree and aging rate were characterized by aging kinetic model and several performance parameters, such as yellowness index, whiteness index, cross-linking density.In addition, the hot air aging beha-viors of rubber latex foams were explored.The results showed that yellowness index increased and whiteness index decreased with the increase in the aging time during the aging process.The cross-linking density increased at a faster rate in the early and middle stages of the aging process, and increased at a relatively slower rate in the later stage of the aging process.The analysis of kinetic model of the rubber latex foams indicated that the aging reaction rate of the rubber latex foams with natural rubber latex mass fraction of 80% was the largest during the aging process, and the aging reaction rates of the rubber latex foams with natural rubber latex mass fraction of 50%, 40% and 0 were relatively close, which demonstrated that the rubber latex foams with low natural rubber latex content had better hot air aging performance.

参考文献/References

[1] Fan Hongwei,Chen Yongliang,Huang Dongmei,et al.Kinetic analysis of the thermal decomposition of latex foam according to thermogravimetric analysis[J].International Journal of Polymer Science,2016,2016:8620879.
[2] 王超逸,王宇,许之浩,等.加速老化条件下乳胶海绵的热老化规律[J].合成橡胶工业,2020,43(1):71-75.
[3] Huang Dongmei,Zhang Mingzhen,Guo Chenning,et al.Experimental investigations on the effects of bottom ventilation on the fire behavior of natural rubber latex foam[J].Applied Thermal Engineering,2018,133:201-210.
[4] 刘通,李普旺,李思东,等.天然乳胶制品性能的影响因素研究进展[J].材料导报:纳米与新材料专辑,2016,30(2):353-356.
[5] Morrell P R,Patel M,Skinner A R.Accelerated thermal ageing studies on nitrile rubber O-rings[J].Polymer Testing,2003,22(6):651-656.
[6] Yarahmadi N,Vega A,Jakubowicz I.Accelerated ageing and degradation characteristics of rigid polyurethane foam[J].Polymer Degradation and Stability,2017,138:192-200.
[7] Stephen R,Siddique A M,Singh F,et al.Thermal degradation and ageing behavior of microcomposites of natural rubber,carboxylated styrene butadiene rubber latices,and their blends[J].Journal of Applied Polymer Science,2010,105(2):341-351.
[8] Kong Eunjoo,Yoon Bumyong,Nam Jae-Do,et al.Accelerated aging and lifetime prediction of graphene-reinforced natural rubber composites[J].Macromolecular Research,2018,26(4):998-1003.
[9] 梁梨花,钟建永,丁玲,等.顺丁橡胶的热氧老化及其机理[J].高分子材料科学与工程,2019,35(2):107-111.
[10] 刘晓丹,谢俊杰,冯志新,等.橡胶材料加速老化试验与寿命预测方法研究进展[J].合成材料老化与应用,2014,43(1):69-73.
[11] 王相鹏.丁苯橡胶老化研究[D].厦门:厦门大学,2017.
[12] 王秀娟.二烯类橡胶及聚碳酸酯材料的老化性能分析及分子模拟研究[D].北京:北京化工大学,2016.
[13] Zhang Zhe,Sun Jing,Lai Yaling,et al.Effects of thermal aging on uniaxial ratcheting behavior of vulcanised natural rubber[J].Polymer Testing,2018,70(2):102-110.
[14] 刘明,高蒙,张兴华,等.橡胶材料自然环境老化失效研究进展[J].环境技术,2015,26(6):31-34.
[15] Choi S-S .Influence of internal strain on change of crosslink density of natural rubber vulcanizates by thermal ageing[J].Polymer International,2001,50(1):107-112.
[16] Liu Xuan,Zhao Jiaohong,Yang Rui,et al.Effect of lubrica-ting oil on thermal aging of nitrile rubber[J].Polymer Degradation and Stability,2018,151:136-143.
[17] 董慧民,李敏婷,刘晓丹,等.交联密度对氢化丁腈橡胶热性能的影响[J].特种橡胶制品,2010,31(5):19-21.
[18] 陈宇杰,李景程.乳胶床垫老化过程的分析与发展[J].居舍,2019,1(3):178.
[19] Zhang Kun,Yao Jinyong,Jiang Tonming.Thermooxidation degradation and life prediction of nitrile butadiene rubber based on kinetics model[C]∥IEEM.IEEE International Conference on Industrial Engineering and Engineering Management,IEEM 2012.Hong Kong:IEEM,2012:782-786.
[20] 李家争.热油老化对氟橡胶特性影响及寿命预测研究[D].杭州:浙江工业大学,2020.

备注/Memo

备注/Memo:
收稿日期:2021-04-11;修订日期:2021-09-23。
作者简介:陈晨(1996—),男,浙江温州人,硕士研究生。主要从事乳胶材料性能方面的研究工作。
基金项目:国家自然科学基金面上项目(51976205);浙江省市场监督管理局科研计划项目(20190117)。
*通讯联系人。
更新日期/Last Update: 2021-11-10