|本期目录/Table of Contents|

[1]张 政,梁玉蓉?鄢,王 龙,等.聚磷酸铵表面改性及对天然橡胶 复合材料性能的影响[J].合成橡胶工业,2024,3:216-221.
 ZHANG Zheng,LIANG Yu-rong,WANG Long,et al.Surface modification of ammonium polyphosphate and its effect on properties of natural rubber composites[J].China synthetic rubber industy,2024,3:216-221.
点击复制

聚磷酸铵表面改性及对天然橡胶 复合材料性能的影响

《合成橡胶工业》[ISSN:1000-1255/CN:62-1036/TQ]

期数:
2024年3期
页码:
216-221
栏目:
实验
出版日期:
2024-05-15

文章信息/Info

Title:
Surface modification of ammonium polyphosphate and its effect on properties of natural rubber composites
文章编号:
1000-1255(2024)03-0216-06
作者:
张 政12梁玉蓉12?鄢王 龙12高国玮1张 涛1
(1. 中北大学 材料科学与工程学院,太原 030051; 2. 太原工业学院 材料工程系,太原 030008)
Author(s):
ZHANG Zheng12 LIANG Yu-rong12 WANG Long12 GAO Guo-wei1 ZHANG Tao1
(1. School of Materials Science and Engineering, North University of china, Taiyuan 030051, China; 2. Department of Materials Engineering, Taiyuan Institute of Technology, Taiyuan 030008, China)
关键词:
天然橡胶聚磷酸铵表面改性溶胶-凝胶法硅烷偶联剂物理机械性能阻燃性能
Keywords:
natural rubber ammonium polyphosphate surface modification sol-gel method silane coupling agent physical and mechanical property flame retardancy
分类号:
TQ 332.2
DOI:
DOI:10.19908/j.cnki.ISSN1000-1255.2024.03.0216
文献标识码:
A
摘要:
先使用碱性硅溶胶在聚磷酸铵(APP)表面形成一层无机自组装微胶囊化APP(SiO2@APP),再使用硅烷偶联剂3-巯丙基三乙氧基硅烷(KH 580)通过溶胶-凝胶法对SiO2@APP表面进行接枝改性制备了接枝改性APP(KH 580-SiO2@APP)阻燃剂,将其应用到天然橡胶(NR)中制备了NR复合材料,研究了APP表面改性对NR复合材料的疏水性、热稳定性、阻燃性能和物理机械性能的影响。结果表明,已成功对APP表面进行改性。相较于APP,经碱性硅溶胶改性后所得SiO2@APP的水接触角增加了205.7%,热稳定性提高了约25.7%;相较于APP/NR复合材料,SiO2@APP/NR复合材料的拉伸强度提高了43.7%,但是其极限氧指数(LOI)有所下降。SiO2@APP经硅烷偶联剂KH 580改性后,所得KH 580-SiO2@APP的水接触角增加了9.1%,热稳定性提高幅度将近11.6%。此外,KH 580-SiO2@APP/NR复合材料的拉伸强度得以提高,达到了16.2 MPa,扯断伸长率上升幅度达到了539%,而LOI略下降至24.3%。
Abstract:
First, a layer of inorganic self-assembled microencapsulated ammonium polyphosphate (APP) (SiO2@APP) was formed on the surface of APP using alkaline silica sol, and then grafting modified APP (KH 580-SiO2@APP) flame retardant was prepared via grafting modification of the silane coupling agent 3-mercaptopropyltriethoxysilane (KH 580) onto the surface of SiO2@APP by sol-gel method. Meanwhile, natural rubber (NR) composites were prepared by the application of KH 580-SiO2@APP to NR, and the effects of APP surface modification on the hydrophobicity, thermal stability, flame retardancy, and physical and mechanical properties of NR composite materials were studied. The results indicated that the surface modification of APP was successful. Compared with APP, the water contact angle of the resulting SiO2@APP increased by 205.7% and the thermal stability increased by about 25.7% after the modification with alkaline silica sol, and in the meantime, compared with APP/NR composite material, the tensile strength of SiO2@APP/NR composite increased by 43.7%, but the limited oxygen index (LOI) decreased. After the modification of SiO2@APP with the silane coupling agent KH 580, the water contact angle of the resul-ting KH 580-SiO2@APP increased by 9.1% and the increase in thermal stability was nearly 11.6%. In additon, the tensile strength of KH 580-SiO2@APP/NR composite was improved to 16.2 MPa, and the elongation at break increased by 539%, while the LOI decreased slightly to 24.3%.

参考文献/References

[1] 王娜, 王升, 张静, 等. 改性微胶囊化聚磷酸铵阻燃天然橡胶[J]. 精细化工, 2017, 34(4): 451-455. [2] 王健, 谭昊哲, 梁玉蓉, 等. 无卤复配阻燃剂对有机黏土/埃洛石/天然橡胶复合材料性能的影响[J]. 合成橡胶工业, 2021, 44(3): 196-200. [3] 刘彦彬, 孙会娟, 程敬泉, 等. APP/EG/三聚氰胺复配对EPDM阻燃性能的影响[J]. 化工设计通讯, 2021, 47(12): 37-38. [4] Gao Feng, Tong Lifang, Fang Zhengping. Effect of a novel phosphorous-nitrogen containing intumescent flame retardant on the fire retardancy and the thermal behaviour of poly(butylene terephthalate)[J]. Polymer Degradation and Stability, 2005, 91(6): 1295-1299. [5] Bourbigot S, Bras L M, Duquesne S, et al. Recent advances for intumescent polymers[J]. Macromolecular Materials and Engineering, 2004, 289(6): 499-511. [6] 李玉芳. 改性聚磷酸铵阻燃剂的应用研究进展[J]. 精细与专用化学品, 2022, 30(11): 42-44. [7] 张孝果. 聚磷酸铵疏水改性及其对环氧树脂阻燃和力学性能影响[D]. 自贡: 四川轻化工大学, 2021. [8] 韩海军, 梁淑君. 微胶囊化聚磷酸铵阻燃改性高密度聚乙烯[J]. 塑料, 2020, 49(5): 24-27. [9] 罗勇, 谢德龙, 者加云, 等. Ⅱ型聚磷酸铵的改性及其阻燃聚丙烯的研究进展[J]. 塑料工业, 2019, 47(1): 6-12. [10] Wu Can, Wang Xiaodong, Zhang Junying, et al. Microencapsulation and surface functionalization of ammonium polyphosphate via in-situ polymerization and thiol-ene photograted reaction for application in flame-retardant natural rubber[J]. Industrial Engineering Chemistry Research, 2019, 58(37): 17346-17358. [11] Wang Na, Wu Yuhu, Mi Long, et al. The influence of silicone shell on double-layered microcapsules in intumescent flame-retardant natural rubber composites[J]. Journal of Thermal Analysis and Calorimetry, 2014, 118(1): 349-357. [12] Yang Yadong, Chen Wen, Liu Mengru, et al. Flame retarded rigid polyurethane foam composites based on gel-silica microencapsulated ammonium polyphosphate[J]. Journal of Sol-Gel Science and Technology, 2021, 98(1): 1-12. [13] Ni Jianxiong, Chen Lijuan, Zhao Kuiming, et al. Preparation of gel-silica/ammonium polyphosphate core-shell flame retardant and properties of polyurethane composites[J]. Polymers for Advanced Technologies, 2011, 22(12): 1824-1831. [14] Cao Kun, Wu Shuiliang, Wang Kaili. Kinetic study on surface modification of ammonium polyphosphate with melamine[J]. Industrial Engineering Chemistry Research, 2011, 50(14): 8402-8406. [15] Sun Lishui, Qu Yongtao, Li Shaoxiang. Co-microencapsulate of ammonium polyphosphate and pentaerythritol and kinetics of its thermal degradation[J]. Polymer Degradation and Stability, 2012, 97(3): 404-409. [16] 吴灿. 聚磷酸铵(APP)微胶囊化及其应用[D]. 北京: 北京化工大学, 2019.

备注/Memo

备注/Memo:
更新日期/Last Update: 1900-01-01