[1]段玉兵,李鹏飞,姚金霞,等.电力封堵用缩合型硅橡胶泡沫防火材料的制备及性能[J].合成橡胶工业,2022,3:213-217.
DUAN Yu-bing,LI Peng-fei,YAO Jin-xia,et al.Preparation and properties of condensed silicone rubber fireproof foam for power plugging[J].China synthetic rubber industy,2022,3:213-217.
点击复制
电力封堵用缩合型硅橡胶泡沫防火材料的制备及性能(PDF)
《合成橡胶工业》[ISSN:1000-1255/CN:62-1036/TQ]
- 期数:
-
2022年3期
- 页码:
-
213-217
- 栏目:
-
- 出版日期:
-
2022-05-15
文章信息/Info
- Title:
-
Preparation and properties of condensed silicone rubber fireproof foam for power plugging
- 文章编号:
-
1000-1255(2022)03-0213-05
- 作者:
-
段玉兵; 李鹏飞; 姚金霞; 马国庆; 张皓; 张晨
-
1. 国网山东省电力公司电力科学研究院, 济南 250003; 2. 山东大学 材料科学与工程学院, 济南 250061
- Author(s):
-
DUAN Yu-bing; LI Peng-fei; YAO Jin-xia; MA Guo-qing; ZHANG Hao; ZHANG Chen
-
(1. State Grid Shandong Electric Power Research Institute of Electric Power Company, Jinan 250003, China; 2. School of Materials Science and Engineering, Shandong University, Jinan 250061, China)
-
- 关键词:
-
乙烯基硅油; 室温硫化; 硅橡胶泡沫; 发泡速率; 交联速率; 泡孔结构; 陶瓷化阻隔层
- Keywords:
-
vinyl silicone oil; room-temperature vulcanization; silicone rubber foam; foaming rate; crosslinking rate; cell structure; ceramic barrier layer
- 分类号:
-
TQ 333.93
- DOI:
-
DOI:10.19908/j.cnki.ISSN1000-1255.2022.03.0213
- 文献标识码:
-
B
- 摘要:
-
研究了不同黏度和用量的乙烯基硅油、具有不同形态的防火填料对脱氢缩合型硅橡胶泡沫材料泡孔结构及防火性能的影响,使用橡胶加工分析仪表征了硅橡胶发泡过程中的发泡速率和交联速率,同时考察了氢氧化铝、云母、硅灰石3种填料对硅橡胶泡沫材料防火性能的影响。结果表明,不加入乙烯基硅油时,硅橡胶泡沫材料的储能模量较低,泡孔以闭孔结构为主;乙烯基硅油的加入提高了硅橡胶泡沫材料的交联速率和储能模量,使之形成较多的开孔结构,同时对硅橡胶泡沫材料泡孔尺寸分布也有影响;加入片状云母容易造成泡孔的坍塌或破裂,但是经火焰烧蚀后泡孔结构和烧蚀面的完整性保持较好,所形成的完整的陶瓷化阻隔层可起到较好的防火作用,而加入氢氧化铝和硅灰石后硅橡胶泡沫材料烧蚀后开裂比较严重。
- Abstract:
-
The effects of the viscosity and content of vinyl silicone oil and fireproof fillers with different shape on the cell structure and fire resistance of condensed silicone rubber foam materials were stu-died. The foaming rate and crosslinking rate of silicone rubber foam during the foaming process was characterized by the rubber processing analyzer. At the same time, the effects of the shape of aluminum hydroxide, mica and wollastonite on the fire resistance of silicone rubber foam were also investigated. The results showed when no vinyl silicone oil was added, storage modulus of silicone rubber foam whose cell structure of was mainly closed was lower. The addition of vinyl silicone oil increased the crosslinking rate and storage modulus of silicone rubber foam, and caused easily more open cell structures, and also had an impact on the cell size distribution of silicone rubber foam. The addition of lamellar mica was likely to result in the collapse and rupture of cell. However, the integrity of the cell structure and the ablation surface were well maintained after the flame ablation, and the complete ceramic barrier layer could play a good role in the fire prevention. In the other hand, silicone rubber foam materials with aluminum hydroxide and wollastonite were seriously cracked after the flame ablation.
参考文献/References
[1] 唐红川, 李鹏虎, 匡国文, 等. 陶瓷化硅橡胶研究进展[J]. 绝缘材料, 2019, 52(7): 1-9.[2] 汪聪颖. 膨胀耐火硅橡胶的成炭强化研究[D]. 上海: 上海大学, 2020.[3] 李刚, 孙名伟, 马凤国. 氢氧化铝表面改性对阻燃硅橡胶性能的影响[J]. 有机硅材料, 2015, 29(6): 458-461.[4] 韦震宇, 张立群, 田明. 硅橡胶阻燃技术研究进展[J]. 合成橡胶工业, 2011, 34(1): 78-84.[5] 王聪鹏. 阻燃陶瓷化硅橡胶的制备与性能研究[D]. 济南: 山东大学, 2017.[6] 魏仕涛, 夏志伟, 周远建. 液体室温硫化硅橡胶在泡沫材料领域的研究进展[J]. 化工新材料, 2015, 43(4) : 18-20.[7] 卜斌, 万炜涛, 陈田安. 硅橡胶泡棉材料的制备[J]. 有机硅材料, 2019, 33(2): 110-114.[8] 刘思阳, 陈屿恒, 黄科, 等. 高性能防火泡沫硅橡胶的制备[J]. 有机硅材料, 2018, 32(1) : 8-15.[9] Xu Tianlu, Zhang Jinrui, Qu Lijie, et al. Fabrication of polysiloxane foam with a pendent phenyl group forimproved thermal insulation capacity and thermal stability[J]. New Journal of Chemistry, 2019, 43(16): 6136-6145.[10] 李刚, 孟凡磊, 马凤国. 发泡与硫化体系的匹配对硅橡胶泡沫材料性能的影响[J]. 合成橡胶工业, 2017, 40(2): 143-146.[11] 孙希路, 刘春霞, 李刚, 等. 白云母与玻璃粉配合对可瓷化阻燃硅橡胶泡沫性能的影响[J]. 有机硅材料, 2017, 31(4): 257-262.[12] 邓军, 康付如, 吴长林, 等. 环保型硅胶泡沫阻燃抑烟及热分解特性[J]. 高分子材料科学与工程, 2018, 34(12): 90-100.[13] Qiu Jiedong, Wu Ting, Qu Jinping. Fabrication of iron oxide nanoparticle decorated boron nitride nanosheet for flame-retar-ding silicone rubber[J]. Materials Letters, 2020, 283: 128712.[14] Zirnstein B, Schulze D, Schartel B. Mechanical and fire properties of multicomponent flame retardant EPDM rubbers using aluminum trihydroxide, ammonium polyphosphate, and polyaniline[J]. Materials, 2019, 12(12): 1932.[15] 马砺, 刘志超, 肖旸, 等. 含无机阻燃剂硅橡胶泡沫的阻燃及热分解特性研究[J]. 材料导报, 2019, 33(11): 1836-1841.[16] Kang Furu, Wang Caiping, Deng Jun, et al. Flame retardancy and smoke suppression of silicone foams with microcapsulated aluminum hypophosphite and zinc borate[J]. Polymers for Advanced Technologies, 2020, 31(4): 654-664.
更新日期/Last Update:
2022-05-15